Cisco Cisco 1 GHz GainMaker Amplifier インストールガイド
Chapter 2 Installation and Configuration
32
To activate the ...
Orient the splitter ...
Aux 1 port and Aux 2 port
so that the word "AUX 1" on the jumper
label is next to the word "AUX 1" on the
amplifier module cover, and so that the
word "AUX 2" on the jumper label is next to
the word "AUX 2" on the amplifier module
cover.
label is next to the word "AUX 1" on the
amplifier module cover, and so that the
word "AUX 2" on the jumper label is next to
the word "AUX 2" on the amplifier module
cover.
Important: Do NOT reverse the splitter in the signal director slot as this could
degrade the amplifier signal.
8 dB Coupler
degrade the amplifier signal.
8 dB Coupler
To activate the ...
Orient the coupler ...
Aux 1 port with an 8 dB "tap leg" signal
and Aux 2 port with a "thru leg" signal
and Aux 2 port with a "thru leg" signal
so that the "8" on the jumper label is next to
the word "AUX 1" on the amplifier module
cover, and so that the word "Thru" on the
jumper label is next to the word "AUX 2" on
the amplifier module cover.
the word "AUX 1" on the amplifier module
cover, and so that the word "Thru" on the
jumper label is next to the word "AUX 2" on
the amplifier module cover.
Aux 2 port with an 8 dB "tap leg" and
Aux 1 port with a "thru leg" signal
Aux 1 port with a "thru leg" signal
so that the "8" on the jumper label is next to
the word "AUX 2" on the amplifier module
cover, and so that the word "Thru" on the
jumper label is next to the word "AUX 1" on
the amplifier module cover.
the word "AUX 2" on the amplifier module
cover, and so that the word "Thru" on the
jumper label is next to the word "AUX 1" on
the amplifier module cover.
12 dB Coupler
To activate the ...
Orient the coupler ...
Aux 1 port with a 12 dB "tap leg" signal
and Aux 2 port with a "thru leg" signal
and Aux 2 port with a "thru leg" signal
so that the "12" on the jumper label is next to
the word "AUX 1" on the amplifier module
cover, and so that the word "Thru" on the
jumper label is next to the word "AUX 2" on
the amplifier module cover.
the word "AUX 1" on the amplifier module
cover, and so that the word "Thru" on the
jumper label is next to the word "AUX 2" on
the amplifier module cover.
Aux 2 port with a 12 dB "tap leg" and
Aux 1 port with a "thru leg" signal
Aux 1 port with a "thru leg" signal
so that the "12" on the jumper label is next to
the word "AUX 2" on the amplifier module
cover, and so that the word "Thru" on the
jumper label is next to the word "AUX 1" on
the amplifier module cover.
the word "AUX 2" on the amplifier module
cover, and so that the word "Thru" on the
jumper label is next to the word "AUX 1" on
the amplifier module cover.
4 Install other options or accessories as desired, or proceed to Installing the
Amplifier Module (on page 33).