Cisco Cisco 1 GHz GainMaker Amplifier インストールガイド
Balancing the Forward Path
61
Forward Path Balancing for Thermal Stations Using Amplifier Only
Compensation Mode
Compensation Mode
Before you begin, make sure that you have configured the amplifier module
according to the specifications in the design print, and that the amplifier has warmed
up for approximately one hour.
according to the specifications in the design print, and that the amplifier has warmed
up for approximately one hour.
To Set Switch S1 for Amplifier Only Compensation Mode
You must set switch S1 to position number 1 to use amplifier only compensation
mode.
mode.
To Determine the Output Tilt
Complete the following steps to determine the output tilt of the amplifier.
1 Connect the test point adapter to the forward main output test point.
1 Connect the test point adapter to the forward main output test point.