Cisco Cisco 1 GHz GainMaker Amplifier インストールガイド

 

Upgrading an Existing Housing Lid 

 

19 

 

 

2  Firmly grasp the housing lid and open it carefully. 
3  Using a screwdriver, remove the hinge screw from the housing hinge. The 

housing lid will now swivel completely open, allowing it to be removed from the 
housing base. 
Important: Place the old housing lid in a safe place until it can be disposed of 
properly. 

 

WARNING: 

It is possible for the housing lid to separate from the housing base and fall, 
possibly causing injury or damage to persons or property below. 

 

4  Firmly grasp the new GainMaker housing lid and place it onto the housing 

bottom, swiveling it into place on the housing hinge. 

 

WARNING: 

It is possible for the housing lid to separate from the housing base and fall, 
possibly causing injury or damage to persons or property below. 

5  Using a screwdriver, replace the hinge screw in the housing hinge. Tighten the 

hinge screw from 5 in-lb to 8 in-lb (0.56 Nm to 0.90 Nm).