Cisco Cisco 1 GHz GainMaker Amplifier インストールガイド
748052 Rev C
GainMaker Amplifier Reverse Switch Removal Instruction Sheet
7
System Amplifier Reverse Switch Removal,
Continued
3.
Remove the power cable from the white plastic retainer clips.
4.
Disconnect the power cable harness from the holes in the amplifier module
cover.
Note: The cable can remain plugged into the power supply module.
Note: The cable can remain plugged into the power supply module.
5.
Using a flat-head screwdriver, loosen the four module retainer screws, and
remove the amplifier module from its housing.
6.
Place the amplifier module upside down on a secure surface.
WARNING:
Avoid personal injury and damage to the amplifier module! Make sure
you place the amplifier module on a secure surface.
7.
Proceed to Removing the Reverse Switch.