Cisco Cisco OptoStar II Driver Amplifier インストールガイド
Operating using ICIM LCD, Continued
When the optical power switching threshold has been set up, the module will
automatically compare the monitored optical input power in channel A and
channel B with the optical input power switching threshold. If the optical
input power in either channel A or channel B is out of the threshold, it will
issue an alarm. The table below lists auto switching status under different
conditions in the auto mode (1 stands for alarm; 0 stands for normal).
automatically compare the monitored optical input power in channel A and
channel B with the optical input power switching threshold. If the optical
input power in either channel A or channel B is out of the threshold, it will
issue an alarm. The table below lists auto switching status under different
conditions in the auto mode (1 stands for alarm; 0 stands for normal).
Item
Alarm Status Switching
Status
Description
A
B
1
0
0
A
Working in channel A
2
0
1
A
Working in channel A
3*
1
0
B
Working in channel B
4
1
1
A/B
Staying in the previous working channel
Note: In item 3*, if the optical input in channel A is normal, it will switch to
channel A automatically, with 1dB of delay.
Continued on next page
OL-29670-02
Operation
3-9