Cisco Cisco Content Security Management Appliance M1070 ユーザーガイド
13-18
Cisco IronPort AsyncOS 8.0 for Security Management User Guide
Chapter 13 Common Administrative Tasks
The basic process is as follows:
Procedure
Step 1
Read the information in
and
Step 2
Configure a local server to retrieve and serve the upgrade files.
Step 3
Download the upgrade files.
Step 4
Choose Management Appliance > System Administration > Update Settings
From this page, choose to configure the appliance to use the local server.
Step 5
Choose Management Appliance > System Administration > System Upgrade
Step 6
Click Available Upgrades.
Note
From the command line prompt you can also do the following:
Run the updateconfig command then run the upgrade command.
For complete information, see
Hardware and Software Requirements for Remote Upgrades
For downloading AsyncOS upgrade files, you must have a system in your internal network that has:
•
Internet access to the Cisco IronPort Systems update servers.
•
A web browser.
Note
For this release, if you need to configure a firewall setting to allow HTTP access to this address, you
must configure it using the DNS name and not a specific IP address.
must configure it using the DNS name and not a specific IP address.
For hosting AsyncOS update files, you must have a server in your internal network that has:
•
A web server — for example, Microsoft IIS (Internet Information Services) or the Apache open
source server — that:
source server — that:
–
supports the display of directory or filenames in excess of 24 characters
–
has directory browsing enabled
–
is configured for anonymous (no authentication) or basic (“simple”) authentication
–
contains at least 350MB of free disk space for each AsyncOS update image
Hosting a Remote Upgrade Image
After setting up a local server, go to http://updates.ironport.com/fetch_manifest.html to download a
zip file of an upgrade image. To download the image, enter your serial number and the version number
of the Cisco IronPort appliance. You will then be presented with a list of available upgrades. Click the
zip file of an upgrade image. To download the image, enter your serial number and the version number
of the Cisco IronPort appliance. You will then be presented with a list of available upgrades. Click the