Cisco Cisco Network Assistant Version 5.8 白書
15
Secure Network Foundation Implementation Guide for Single Site Deployments
Secure Network Foundation
Configuring Port Settings
Perform the following steps to configure port settings on the access and aggregation switches.
Step 1
Highlight the appropriate switch in the Topology View window.
Step 2
In the left pane, click Configure.
Step 3
Click Ports and choose Port Settings.
Step 4
Choose a port in the Port Settings window, click Modify, and enter a description for the port.
Leave the default settings for the other options unless the port is not used. If the port is not used, change
the Status to Disabled to prevent any unauthorized devices from connecting to the network.
the Status to Disabled to prevent any unauthorized devices from connecting to the network.
Step 5
Click OK.
Step 6
Click Apply to save all the Port Settings configuration changes and then click OK to close the Port
Settings window.
Settings window.
displays the Port Settings configuration window.
Figure 9
Port Settings Configuration Window