Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch テクニカルリファレンス
Administration
Auto Configuration
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
28
2
Syntax Descriptions
Default
No backup TFTP server address is configured.
Command Modes
Privileged Exec
Related Commands
boot autoinstall default-config
Use this command to enable the switch to attempt to download a default network
configuration file when no host-specific configuration file is found during bootup.
Use the
configuration file when no host-specific configuration file is found during bootup.
Use the
no form of this command to disable it.
boot autoinstall default-config
no boot autoinstall default-config
Default
This feature is enabled.
Parameter
Description
server ip
The IP address of a TFTP server.
hostname
The hostname of the backup TFTP server. The switch must
be configured to use a DNS server if a hostname is
specified.
be configured to use a DNS server if a hostname is
specified.
Command
Description
boot autoinstall
Enables and disables the Auto Configuration feature.
boot autoinstall
backup-bootfile
backup-bootfile
Configures a backup configuration file name to be used
when the Auto Configuration process cannot locate the
server or network configuration file name provided by the
DHCP server at startup.
when the Auto Configuration process cannot locate the
server or network configuration file name provided by the
DHCP server at startup.
show autoinstall
Displays Auto Configuration status information.