Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch テクニカルリファレンス
Administration
Auto Configuration
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
29
2
Command Modes
Privileged Exec
Usage Guidelines
The Auto Configuration feature must be enabled on the switch for this feature to be
operational. See the boot autoinstall command.
operational. See the boot autoinstall command.
Related Commands
show autoinstall
Use this command to display the status of the Auto Configuration feature.
show autoinstall
Command Modes
Privileged Exec
Examples
The following shows sample output for the command:
(Switch) #show autoinstall
AutoInstall Mode............................... Started
AutoInstall default-config Mode................ Disabled
AutoInstall Backup TFTP Server Address......... Not configured
AutoInstall Backup Boot Filename............... Not configured
AutoInstall State.............................. Waiting for boot options
AutoInstall default-config Mode................ Disabled
AutoInstall Backup TFTP Server Address......... Not configured
AutoInstall Backup Boot Filename............... Not configured
AutoInstall State.............................. Waiting for boot options
Related Commands
Command
Description
boot autoinstall
Enables and disables the Auto Configuration feature.
show autoinstall
Displays Auto Configuration status information.
Command
Description
boot autoinstall
Enables and disables the autoinstall feature.