Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch テクニカルリファレンス
Security
MAC Based Port Security
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
369
8
show port-security
Use this command to display the port-security settings. If you do not use a
parameter, the command displays the settings for the entire system. Use the
optional parameters to display the settings on a specific interface or on all
interfaces. It also shows whether the port is shut down by the port-security
feature.
parameter, the command displays the settings for the entire system. Use the
optional parameters to display the settings on a specific interface or on all
interfaces. It also shows whether the port is shut down by the port-security
feature.
show port-security
[
{interface | all}
]
Syntax Descriptions
Command Modes
Privileged Exec
Examples
This field displays if you do not supply any parameters
(switch) #show port-security
Port Security Administration Mode: Enabled
If you specify an interface, the following fields display:
(switch142E4E) #show port-security e1
Admin
Dynamic
Static
Violation
Trap
Port
Intf
Mode
Limit
Limit
Action
Trap
Frequency Status
------
-------
---------
--------
------------ -------- --------
------
-
e1
e1
Disabled 0
256
discard
Disabled N/A
Active
If you specify the all parameter, the same files display for all interfaces.
Parameter
Description
interface
The port number.
all
Displays port security configuration for all ports.
Intf
The port name.
Admin Mode
Port Locking mode for the interface.