Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch テクニカルリファレンス
Quality of Service
Class of Service Commands
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
378
9
Syntax Descriptions
Command Modes
Global Config
Interface Config
Related Commands
classofservice trust
This command sets the class of service trust mode of an interface. You can set the
mode to trust one of the Dot1p (802.1p), IP DSCP, or IP Precedence packet
markings. You can also set the interface mode to untrusted. Use the
mode to trust one of the Dot1p (802.1p), IP DSCP, or IP Precedence packet
markings. You can also set the interface mode to untrusted. Use the
no form of the
command to set the interface mode to the default value (trust dot1p).
NOTE
Interface Config mode configuration overrides the Global Config mode
configuration for the interface.
configuration for the interface.
classofservice trust {dot1p | ip-dscp | ip-precedence | untrusted | all}
no classofservice trust
Parameter
Description
ip-precedence-
value
value
The IP precedence value. The range is 0–7.
trafficclass
The trafficclass value. The range is 1–8.
Command
Description
show
classofservice ip-
precedence-
mapping
classofservice ip-
precedence-
mapping
Displays the global IP precedence value mapping to
internal traffic classes or the mapping for a specific
interface.
internal traffic classes or the mapping for a specific
interface.