Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch テクニカルリファレンス
Administration
Switch Management Access Control
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
91
2
Examples
The following shows sample output for the command:
switch#show serial
Serial Port Login Timeout (minutes)............ 5
Baud Rate (bps)................................ 115200
Character Size (bits).......................... 8
Stop Bits...................................... 1
Parity......................................... none
Baud Rate (bps)................................ 115200
Character Size (bits).......................... 8
Stop Bits...................................... 1
Parity......................................... none
Related Commands
Management Access Lists
deny
Use this command in Management Access-List Config mode to set conditions for
the management access list. This command can take the following forms:
the management access list. This command can take the following forms:
deny interface interface [service service] [priority priority]
deny ip-source ip-address [mask mask | prefix-length] [service service] [priority
priority]
deny user username [priority priority]
Syntax Descriptions
Command
Description
show network
Displays configuration settings associated with the
switch's management interface.
switch's management interface.
show serial
Displays configuration settings associated with the
switch's serial console interface.
switch's serial console interface.
Parameter
Description
interface
A port number.
service
The service type:
telnet, http, tftp, ssh, or snmp.
priority
Priority for the rule. The range is 1–16.