Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch テクニカルリファレンス
Administration
Switch Management Access Control
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
93
2
management access-class
Use this command in Global Config mode to restrict management connections. To
disable restriction, use the
disable restriction, use the
no form of this command.
NOTE
Console access cannot be disabled.
management access-class {console-only | access-list-name}
no management access-class
Syntax Descriptions
Default
Management access is not restricted.
Command Modes
Global Config
Examples
The following example uses the management access-class command to restrict
access to an access list named mlist after the access list has been defined:
access to an access list named mlist after the access list has been defined:
switch(config)#management access-list mlist
switch(config-macal)#deny interface e1 priority <1-16
switch(config-macal)#deny interface e2 priority <1-16>
switch(config-macal)#permit priority <1-16>
switch(config-macal)#exit
switch(config) #management access-class mlist
switch(config-macal)#deny interface e1 priority <1-16
switch(config-macal)#deny interface e2 priority <1-16>
switch(config-macal)#permit priority <1-16>
switch(config-macal)#exit
switch(config) #management access-class mlist
permit
Sets conditions for the management access list.
show
management
access-list
management
access-list
Displays information about the configured management
access list.
access list.
Command
Description
Parameter
Description
console-only
Restricts management access to the serial (console)
interface.
interface.
access-list-name
Restricts management access to the specified access list
name.
name.