Samsung SCC-B5393P ユーザーズマニュアル

1.  Pull the power and video cables through 

the pipe connection hole on the camera 

side 

1)  Remove the side cover from the Case 

using a coin or minus (-) driver. (Rotate 

counterclockwise.)

2)  Push the power and video cables 

stretched outside of the bottom hole 

into the 

Case. And pull them out from 

the side cover of the Case. 

2.  Attach the removed side cover to the 

bottom hole and rotate it clockwise using 

a coin or minus (-) driver. (Be sure to 

insert the O-ring (P22 T2.4) into the hole 

before assembly. The ring is necessary 

for waterproofing.)

3.  After pulling the power and video cables 

through the connection pipe, screw the 

male thread pipe into the female pipe 

thread in your camera tightly to fix the 

Main body. (In this case, be sure to tape 

with Teflon tape before assembly for 

waterproofing. Be careful for the wiring 

cable not to be stuck in the connection 

area.)

4.  Adjust the lens direction. For more 

information, see page 17, “Adjusting the 

camera direction.”

5.  Attach the Dome cover. For more 

information, see step 3 in “To install your 

camera bottom on a pipe” on page 13.

AB68-00649C(02)Eng.indd   16

2007-05-14   ｿﾀﾈﾄ 7:32:46