Samsung SNC-L200WP ユーザーズマニュアル

Netcam(W)_SNC-L200(W)

27

Netcam(W)_SNC-L200(W)

26

Used to search an IP router (router or wireless router)connected
with the Netcam(W) or a Netcam(W) directly connected with the
PC.

- If a warning screen appears, click the ‘block clear’ button (Windows XP Service Pack2).

- Press the Cancel Button on the 

[Searching ….] 
window to cancel the search during process.

1.  Server Name: The name of the Netcam(W) set by the manager

2.  Model: The model name of the Netcam(W) 

3.  IP Type: Displays the current status of network among Static,DHCP and PPPoE.

4. IP Address: The IP address of the Netcam(W) 

5. HTTP Port: The port number used to access the Netcam(W) connected over a local network.

6. Mac Address: The hardware address of the Netcam(W) shown on the back of the label.

7. Ext Port: The port number that allows access to the Netcam(W) from the external Internet.

8. Status : “Success(W)”appears when the network settings are correct,and “Auto Fail ”appears when the

settings are not authorized during the installation process.

9. Search Button: Searches the Netcam(W) currently connected over the network.

10. Clear Button: Deletes the list of the Netcam(W) s from the SNC Installer List.

11. Manual Set Button: The user enters the network settings of the Netcam(W).

12.  Auto Local Set Button: The SNC Installer automatically sets the network settings of the Netcam(W).

13. Internet Set (UPnP)Button: Port-forward to enable access to the Netcam(W) from the external

Internet.

14. Close Button: Closes the SNC Installer window.

15.  URL via internet: The URL address used for access from the external Internet.

SNC Installer Screen

The search function of the SNC Installer is enabled when the camera is connected 
with the PC via an IP router or directly with the PCover a single network.