Samsung SNC-L200WP ユーザーズマニュアル
Netcam(W)_SNC-L200(W)
73
Netcam(W)_SNC-L200(W)
72
Access to Netcam(W) via a cell phone (USA Only)
You can view still images of Netcam(W) by accessing the Internet via a cell phone.
Enter http: //Global_IP address (or domain name): port number/wap. htm on the
URL page of the cell phone, and press the OK button.
(ex) http://wfffbbb.websamsung.net:8080/wap.htm
- Enter the user name and password when the authorization window appears, and
press the OK button.
< Help Page >
Explains camera operations.
- Button 1: Displays the main page.
- Button 2/4/6/8: Controls the Pan/Tilt.
- Button 5: Refreshes still images.
- Button 7: Turns On/Off the flash.
- Button 9: Turns On/off the PIR sensor.
< View and Control Images >
< Main Page >
- 160x120
- 320x240
- Help
DISPLAY MODE
- You can view images without the authorization process when the
“Access Limitation Configuration” of the Smart Viewer settings is
set to “Full Access.”
set to “Full Access.”
- The authorization process does not appear again after an initial
authorization if you store the ID/Password in the cache during
mobile phone settings.
mobile phone settings.
- Communication service providers available are listed below
(as of August, 2005).
* Cingular
* Sprint
* T-Mobile
* Sprint
* T-Mobile
- Connection to or control over SNC-L200(W)may not work,
depending on the communication service provider, mobile phone’s
model or firmware version, area and/or wireless network operator,
or for other reasons.
model or firmware version, area and/or wireless network operator,
or for other reasons.
Warning