Samsung SMO-210TRP ユーザーズマニュアル
Eng-6
Chapter 2: Installation
Installation Environments
This section describes the environmental requirements for safe installa-
tion and use.
Install the product on a flat table or in a rack. It should be used only
when level and should not be used when stood vertically or obliquely.
The location in which the main system is installed and the configuration
of the wiring room are very important for proper operation of the system.
When the products are installed too closely together or the location is
poorly ventilated, the system may not operate properly and maintenance
of the system may be difficult.
Sufficiently circulate the air within the system operating room and tightly
fasten the cover of the main system to prevent malfunction and reduce
system downs due to environmental causes.
There are high voltage parts inside. Do not arbitrarily open the cover.
tion and use.
Install the product on a flat table or in a rack. It should be used only
when level and should not be used when stood vertically or obliquely.
The location in which the main system is installed and the configuration
of the wiring room are very important for proper operation of the system.
When the products are installed too closely together or the location is
poorly ventilated, the system may not operate properly and maintenance
of the system may be difficult.
Sufficiently circulate the air within the system operating room and tightly
fasten the cover of the main system to prevent malfunction and reduce
system downs due to environmental causes.
There are high voltage parts inside. Do not arbitrarily open the cover.
Install the product in a place that meets the following environmental con-
ditions. Be sure to maintain the system under the temperatures and
humidity conditions given below:
ditions. Be sure to maintain the system under the temperatures and
humidity conditions given below:
• Operating temperature : 0 °C ~ 40 °C
• Storage temperature : -20 °C ~ 60 °C
• Operating humidity : 20% ~ 85% RH
• Storage humidity : 20% ~ 95 RH
• Input voltage : AC 100 ~ 240V
• Frequency: 50/60 Hz
• Storage temperature : -20 °C ~ 60 °C
• Operating humidity : 20% ~ 85% RH
• Storage humidity : 20% ~ 95 RH
• Input voltage : AC 100 ~ 240V
• Frequency: 50/60 Hz
Caution
When operating the product, the fluctuation of input voltage must be
within 10% of the rated voltage and the external power outlet must be
grounded, otherwise, it may cause electric shock or malfunction of the
product. Do not connect heat-generating appliances such as a hair dryer,
iron or refrigerator to the same power outlet in which the product is
plugged, otherwise it may cause a fire or malfunction of the product. The
use of an Automatic Voltage Regulator (AVR) is highly recommended to
ensure that stable power is supplied.
Be sure to coil CORE-FERRITE on the connector to reduce elector-mag-
netic interference (EMI).
When operating the product, the fluctuation of input voltage must be
within 10% of the rated voltage and the external power outlet must be
grounded, otherwise, it may cause electric shock or malfunction of the
product. Do not connect heat-generating appliances such as a hair dryer,
iron or refrigerator to the same power outlet in which the product is
plugged, otherwise it may cause a fire or malfunction of the product. The
use of an Automatic Voltage Regulator (AVR) is highly recommended to
ensure that stable power is supplied.
Be sure to coil CORE-FERRITE on the connector to reduce elector-mag-
netic interference (EMI).
Unpacking
Remove the package cover and place the product on a flat and secure
surface or in the installation location. Check whether all the following
devices and accessories are included with the main system.
surface or in the installation location. Check whether all the following
devices and accessories are included with the main system.
CAMERA installation method
1) Vari focal AI standard Camera (SOC-320P)
1. Find a suitable place for installing the camera. (Must be able to bear
five times the weight of the camera [approx. 1kg])
2. Install the Mounting Bracket provided at
the desired location, and assemble the camera
onto the bracket. Then connect the cable to the
RJ-45 connector.
onto the bracket. Then connect the cable to the
RJ-45 connector.
3. Plug the other end of the cable that is connected to the camera into
the monitor.
4. Use the Handle on the Mounting Bracket when
adjusting the direction of view.
5. Adjusting Zoom and Focus.
5-1. Turn the lens part of the camera in the direction shown in the
5-1. Turn the lens part of the camera in the direction shown in the
picture and pull to separate the lens-hood.
5-2. Use the lens Zoom Lever to set the desired
zoom position.
6-Pin Accessory
(VCR)
Power Cord
4-Pin
Accessory(AUX)
Remote Control/
Batteries
Color Monitor
User’s Guide
Item
Monitor
Varifocal Camera
Zoom Camera
Door Bell
Camera Bracket
Camera Cable
Installation Manual
Power Cord
4-Pin
Accessory(AUX)
6-Pin
Accessory(VCR)
Remocon
Model
SMO-21MP/150MP
SOC-320P
SOC-420P
SDB-100
SBR-110
MCB-60
Description
21”/15” Flat CRT
Monitor
Normal Auto Iris
Varifocal Camera
12X Zoom Lens
High Band Camera
Door Bell Box
Standard type
Bracket
8Pin Shield Cable
4-Pin AUX Cable
6-Pin VCR Cable
Q’ ty
1
1
1
1
2
3
1
1
1
1
Note
Screw2
Tapping
Screw6
60ft (1ft=
0.3048m)
Battery2
Cable
SDB-100
SOC-320P
SOC-420P
Camera Bracket