Samsung HW-H430 ユーザーズマニュアル

ページ / 21
18
functions
SOFTWARE UPGRADE
Samsung may offer upgrades for the 
Soundbar's system firmware in the future.
If an upgrade is offered, you can upgrade the 
firmware by connecting a USB drive with the 
firmware upgrade stored on it to the USB port 
on your Soundbar.
Note that if there are multiple upgrade files, you 
must load them onto the USB drive singly and 
use them to upgrade the firmware one at a time.
Please visit Samsung.com or contact the 
Samsung call center to receive more information 
about downloading upgrade files.
  
 
Insert a USB drive containing the firmware upgrade into the USB port on the main unit.
 
Do not disconnect the power or remove the USB drive while upgrades are being applied. The main unit 
will turn off automatically after completing the firmware upgrade. 
When software is upgraded, settings you have made will return to their default (factory) settings.  
We recommend you write down your settings so that you can easily reset them after the upgrade.
 
Once upgrading the product software is completed, turn off the product and then press and hold (
      
) button 
for a while to reset the product.
 
If the firmware fails to upgrade, we recommend formatting the USB device in FAT16 and trying again.
 
For upgrading purposes, do not format the USB drive in NTFS format because it is not a supported file system.
 
Depending on the manufacturer, some USB devices may not be supported.
5v 500mA
5v 500mA
• Connect USB devices directly to the USB port of the product. Otherwise, you may encounter a 
USB compatibility problem.
• Do not connect multiple storage devices to the product via a multi-card reader. It may not 
operate properly.
• Digital camera PTP protocols are not supported.
• Do not remove the USB device while it is being read.
• DRM-protected music files (MP3, WMA) from a commercial web site will not be played.
• External HDDs are not supported.
• Mobile phone devices are not supported.
• File Format Type Compatibility list:
Format
Codec
Sampling Rate
*.mp3
MPEG 1 Layer2
16KHz ~ 48KHz
MPEG 1 Layer3
MPEG 2 Layer3
MPEG 2.5 Layer3
*.wma
Wave_Format_MSAudio1
Wave_Format_MSAudio2
*.aac
AAC
16KHz ~ 96KHz
AAC-LC
HE-AAC
24KHz ~ 96KHz
*.wav
-
16KHz ~ 48KHz
*.Ogg
OGG 1.1.0
*.Flac
FLAC 1.1.0, FLAC 1.2.1
16KHz ~ 96KHz
  
 
If there are too many folders and files stored in the USB device, reading may take some time.
HW-H430 EN-ENG-0813-ECO.indd   18
2015/4/2   8:30:19