Samsung Blu-ray Player J5500 ユーザーズマニュアル
3. Press the ▲▼ buttons to select Wired
Network Settings, and then press the
E button. The Wired Network Settings
screen appears.
E button. The Wired Network Settings
screen appears.
4. Select the Internet Protocol Setup field,
and then press the
E button.
5. Press the ▲▼ buttons to select Manual,
and then press the
E button.
6. Press the ▼ button to go to the first entry
field (IP Address).
7. Use the number buttons on your remote
to enter numbers.
8. When done with each field, use the ►
button to move to the next field. You can
also use the other arrow buttons to move
up, down, and back.
also use the other arrow buttons to move
up, down, and back.
9. Enter the IP Address, Subnet Mask, and
Gateway values in the same way.
10. Press the ▼ button to go to DNS.
11. Press the ▼ button to go to the first DNS
entry field.
12. Enter the numbers as above.
13. Press the RETURN button on your
remote.
14. Run a Network Test to ensure the player
has connected to your network.
Network Test
Use this menu item to check whether your
network connection is working or not.
network connection is working or not.
Network Status
Use to check whether a connection to
a network and the Internet has been
established.
a network and the Internet has been
established.
Device Name
Device Name function allows you to change
player's name by selecting from device
player's name by selecting from device
name list.
BD-Live Internet Connection
Set to allow or prohibit an Internet
connection when you use the BD-LIVE
service.
connection when you use the BD-LIVE
service.
o Allow (All) : The Internet connection is
allowed for all BD-LIVE contents.
o Allow (Valid Only) : The Internet
connection is allowed only for BD-LIVE
contents containing a valid certificate.
contents containing a valid certificate.
o Prohibit : No Internet connection is
allowed for any BD-LIVE content.
Network Settings
Please contact your ISP to find out if your IP
address is static or dynamic. If it is dynamic
- and most are - we recommend using the
Auto procedure for network setup. This is
easiest and will work in the majority of cases.
If it is static, you must use the manual set up
procedure.
address is static or dynamic. If it is dynamic
- and most are - we recommend using the
Auto procedure for network setup. This is
easiest and will work in the majority of cases.
If it is static, you must use the manual set up
procedure.
Network setup directions start below.
✎
NOTES
This unit can only be connected to a Network
via a wired connection.
Wired Network Settings
1. In the Home menu, press the ▲▼ ◄►
buttons to select Settings, and then
press the
press the
E button.
2. Press the ▲▼ buttons to select Network,
and then press the
E button.
3. Press the ▲▼ buttons to select Wired
Network Settings, and then press the
E button. The Wired Network Settings
screen appears.
E button. The Wired Network Settings
screen appears.
pp
Picture
Sound
Network
System
Language
Security
General
Support
Settings
Wired Network Settings
Internet Protocol Setup
: Auto
IP Address
:
0
0
0
0
Subnet Mask
:
0
0
0
0
Gateway :
0
0
0
0
DNS :
Auto
DNS Server
:
0
0
0
0
> Move " Select ' Return
4. In the Internet Protocol Setup field, select
Auto if it is not selected. (Press
E select
Auto, and then press
E.)
5. The Auto Function acquires and fills in the
values for IP Address, Subnet Mask,
etc., automatically.
etc., automatically.
✎
NOTES
This process can take up to five minutes.
6. After the Network Function has acquired
the network values, press the RETURN
button.
button.
7. Select Network Test, and then press v to
ensure the player has connected to your
network.
network.
8. When the Network Test is complete, press
the RETURN twice to return to the Main
Menu.
Menu.
9. If the Network Function does not acquire
the network values, go to the directions
for Manual Setup.
for Manual Setup.
Manual Network Settings
Before you start manual network setup, you
need the network setting values.
need the network setting values.
To enter the Network Settings into your
player, follow these steps:
player, follow these steps:
1. In the Home menu, press the ▲▼ ◄►
buttons to select Settings, and then
press the
press the
E button.
2. Press the ▲▼ buttons to select Network,
and then press the
E button.
13