Canon ir2016, ir2020 マニュアル

2-4

F-2-11

M1: Stach tray shift motor

M2: Feed motor

M3: Stack slide motor

M4: Offset motor

[1]: Finisher controller PCB

[2]: Paper surface sensor signal

[3]: Process tray papepr presence sensor signal

[4]: Inlet sensor signal

The feed roller is driven by the feed motor (M2). when the motor turns in the normal direction,the feed roller[1] is driven to eject paper foward the stack tray.

F-2-12

The offset roller [1] is driven by the feed motor (M2). When prescribed time lapses after paper is fed by the feed roller [2], the offset solenoid [3] is turned off to

bring the offset roller [1] into contact with the paper, feeding the paper toward the track tray along with the feed roller [2]. When the trailing edge of the paper leaves

the feed roller, the paper is then fed only by the offset roller [1].

[1]

M4

M2

M3

[4]

[3]

[2]

M1