Canon ir2016, ir2020 マニュアル

2-3

F-2-7

12) With the paper stack held by the paper holder, the stack slider [11] moves toward the stack tray and stops.

13) The return wall [12] is pressed by the stack slider, being raised on the process tray.

14) The tray paper holder [13] moves away from the stack tray.

F-2-8

15) The stack slider [14] moves in the opposite direction from the stack tray.

16) The lever of the Claw [15] is engaged with the groove in the tray and the paper holder opens while moving.

17) The stack stops at the return wall [16], falling into the stack stay.

F-2-9

18) The slider [17] moves to the original position.

19) The tray paper holder [18] catches hold of the sheets dropped in the stack tray.

F-2-10

Sheets of paper fed from the host machine are put in the process tray.

The sheets are aligned and stapled in the process tray and then ejected to the stack tray.

The following illustration shows major components of the feed system.