Canon ir2016, ir2020 マニュアル

3-1

1) Open the front cover of the host machine.

2) Remove the four RS tightening screws (M3 x 8) [1], and then detach the

rear cover [2].

F-3-1

1) Remove the five RS tightening screws (M3 x 8) [1]. Release the two hooks

[2], and then detach the lower-right cover [3].

F-3-2

1) Remove the RS tightening screw (M3 x 8) [1], and then detach the upper-

right cover [2].

F-3-3

1) Disconnect the connectors (J905) [1] and (J906) [2] on the finisher con-

troller PCB, and then remove the two screws with toothed washer (M3 x 6)

[3].

F-3-4

2) Remove the three TP binding screws (M3 x 6) [4], and then remove the

Shift Tray [5] forward.

F-3-5

When removing the tray unit, be careful not to get your hands hit or pinched.

Do not hold the tray. 

1) Disconnect the connector (J203) [1] on the DC controller PCB and the

connector (J50) [2] on the optional power supply PCB, and then disconnect

the harness from the guide.

F-3-6

2) Remove the three TP binding screws (M3 x 6) [3], and then disconnect the

finisher [4] forward.

[1]

[2]

[1]

[3]

[2]

[2]

[1]

[2]

[2]

[1]

[3]

[4]

[5]

[2]

[1]