Canon ir2016, ir2020 マニュアル

3-2

F-3-7

When removing the tray unit, be careful not to get your hands hit or pinched.

Do not hold the tray.

1) Open the front cover of the host machine.

2) Remove the four RS tightening screws (M3 x 8) [1], and then detach the

rear cover [2].

F-3-8

1) Remove the five RS tightening screws (M3 x 8) [1]. Release the two hooks

[2], and then detach the lower-right cover [3].

F-3-9

1) Remove the RS tightening screw (M3 x 8) [1], and then detach the upper-

right cover [2].

F-3-10

1) Disconnect the connectors (J905) [1] and (J906) [2] on the finisher con-

troller PCB, and then remove the two screws with toothed washer (M3 x 6)

[3].

F-3-11

2) Remove the three TP binding screws (M3 x 6) [4], and then remove the

Shift Tray [5] forward.

F-3-12

When removing the tray unit, be careful not to get your hands hit or pinched.

Do not hold the tray. 

1) Disconnect the connector (J203) [1] on the DC controller PCB and the

connector (J50) [2] on the optional power supply PCB, and then disconnect

the harness from the guide.

[4]

[3]

[1]

[2]

[1]

[3]

[2]

[2]

[1]

[2]

[2]

[1]

[3]

[4]

[5]