Apple emac ati usb2 2005 サービスマニュアル

eMac ATI Graphics/ USB 2.0/2005 Take Apart - 101

 Modem (eMac USB 2.0)

1.

Disconnect the RJ-11 cable (#1) from the top of the modem. Remove the two modem 

screws (#2) and gently pry the board off its connector.The board is fragile; pry the 

board from the top and bottom.

Replacement Note: When replacing the modem, don’t apply pressure to the middle of the 

board. The board should be pressed into place by holding the modem by the top and 

bottom.