abit wlp-01 ユーザーズマニュアル

 

2.2.1 Operating Range 

The signal range of WLP-01 depends on the operating environment. Obstacles such as walls 
and metal barriers could reflex or absorb radio signals. Devices such as microwave oven can 
also interfere the wireless network tremendously.   

802.11b: Indoor 130ft (40m), outdoor (LOS, Light-of-Sight) 1000ft (310m) 

802.11g: Indoor 80ft (30m), outdoor (LOS, Light-of-Sight) 200ft (60m) 

By default, the WLP-01 automatically adjusts the data rate. The closer the wireless stations 
are, the better signal and transmit speed they receive. To improve your wireless transmission, 
move your wireless stations closer to the WLP-01. 

2.3 Driver Installation 

Place the “Driver & Utility CD” into the CD-ROM drive in your system. The following installation 
auto-run screen appears. If not, browse the root directory of the CD-ROM via the File Manager, 
and double click the “AUTORUN” file. 

The contents of the “Driver & Utility CD” packed with WLP-01 are subject to change without 
notice. Visit the 

If your computer is using Windows operating system, it will automatically detect the WLP-01 
when system boots and displays an “Add New Hardware Wizard” window. Click [Cancel] and 
then proceed with the following procedures. 

To install the WLP-01 driver: 

1.  Place its “Driver & Utility CD” into the CD-ROM drive.

 

2.  The “Driver & Utility CD” automatically displays the Drivers menu if the “AUTORUN” 

function is enabled in your computer. Click the wireless driver and follow the on-screen 
instructions to install the WLP-01 driver.

 

※  If the “AUTORUN” function is disabled in your computer, locate the Wireless 

folder under the root directory of the “Driver & Utility CD”, then double click the 
[Setup.exe] file to start installation. 

3.  Make sure to select the correct 

operating-channel plan according to your 
residence so as to avoid possible legal 
litigation. 

※  To use the “Soft AP” function, you may need to install Ethernet adapter driver. 

8 

WLP-01