AMX design xpress home theater v1.3 ユーザーガイド
Using the DXP-HT Project Wizard
22
DXP-HT v1.3 - Programmer’s Guide
Click the Add button to add a device to the list, via the Source Configuration dialog.
Select a device from the list and click the Edit button to edit the control information
associated with that device. You can also edit a device by double clicking on a device.
Click the Duplicate button to duplicate a selected source and its current settings.
Select a device from the list and click the Delete button to delete that device from the list
and remove it from the project.
Adding a Device to the Project
To add a device to your system, click the Add button in the System Information dialog. This opens
the Device Configuration dialog - Device Data tab.
In the Source Configuration dialog (Source Data tab):
1.
Select the type of equipment you are adding from the Source Type drop-down list.
2.
Enter a name for the device in the Display Name field. This is the name for the device that will
appear on the touch panel.
3.
If the device is a CD or DVD player, specify the size of the disc changer (if applicable; by
default this field is set to 1).
• Lighting System:
Click the down-arrow to open a drop-down list of lighting systems sup-
ported by DXP-HT. Select the lighting system you are using, or select No
Lighting Control (at the top of the list) if your project does not include any
lighting control.
ported by DXP-HT. Select the lighting system you are using, or select No
Lighting Control (at the top of the list) if your project does not include any
lighting control.
Additional fields may be displayed depending upon the device configuration
requirements of the selected lighting system. For example, the LiteTouch
5000LC displays a combo box to select the baud rate for communications
with the LiteTouch controller. However, the AMX Radia system does not
have a Baud Rate combo box because it communicates via AXlink.
requirements of the selected lighting system. For example, the LiteTouch
5000LC displays a combo box to select the baud rate for communications
with the LiteTouch controller. However, the AMX Radia system does not
have a Baud Rate combo box because it communicates via AXlink.
In addition to selecting the lighting system, DXP-HT will automatically
select the default baud rate if applicable. You can manually set the baud
rate for non-standard systems.
select the default baud rate if applicable. You can manually set the baud
rate for non-standard systems.
• i!- TimeManager:
The i!-TimeManager section allows you to enable the i!-TimeManager
remote time server application, which updates the time information on any
communicating Master running the i!-TimeManager code.
remote time server application, which updates the time information on any
communicating Master running the i!-TimeManager code.
1. Click the Use i!-TimeManager radio button to select a time zone and
apply Daylight Savings Time rules.
apply Daylight Savings Time rules.
2. Select a time zone from the Time Zone drop-down list.
3. Click the Automatically adjust clock for daylight saving changes
radio button to allow the application to automatically adjust the time for
daylight savings.
radio button to allow the application to automatically adjust the time for
daylight savings.
• Device Information
(Maximum of 32):
This table displays a list of all controlled devices currently in this system
(maximum of 32). The devices defined here determine the dialogs and
information required by the rest of the Project Wizard.
(maximum of 32). The devices defined here determine the dialogs and
information required by the rest of the Project Wizard.
Every device that will be controlled by the DXP-HT system needs to be
defined within the Device Information list. The setup and configuration of
the devices is handled on subsequent dialogs in the Project Wizard, but
each device will be listed along with its Display Name, Control Method and
Control Logic, if any.
defined within the Device Information list. The setup and configuration of
the devices is handled on subsequent dialogs in the Project Wizard, but
each device will be listed along with its Display Name, Control Method and
Control Logic, if any.
Note: In addition, any uncontrolled devices, such as computers, that have a
switcher input or output should be defined in the Device Information list.
switcher input or output should be defined in the Device Information list.
The Device Information List can be sorted by clicking on the column's
header cell. Clicking on the header cell will toggle between sorting in
ascending or descending order.
header cell. Clicking on the header cell will toggle between sorting in
ascending or descending order.