AMX design xpress home theater v1.3 ユーザーガイド

Use the radio buttons to select the Control Method associated with the new device (IR, Serial 

or IP).

 

If IR is selected, you must locate the associated IRL file by using the Browse button from 

the IR Data section. If you are using Serial as a Control Method, choose the device from 

the Control Logic drop-down list.

To add a device to your system, click the Add button in the System Information dialog. This opens 

the Device Configuration dialog - Device Data tab. 

In the Source Configuration dialog (Source Data tab):

Select the type of equipment you are adding from the Source Type drop-down list.

Enter a name for the device in the Display Name field. This is the name for the device that will 

appear on the touch panel. 

If the device is a CD or DVD player, specify the size of the disc changer (if applicable; by 

default this field is set to 1).

Use the radio buttons to select IR as the Control Method associated with the new device.

Associate an IR code file (*IRL) to the new device:

 

Click the Browse button to locate and select the appropriate IR file via the Select IR File 

dialog.

 

Click the Search button (the binoculars icon) to search for the appropriate IR file, via the 

Search for IR File dialog.

Once an IR file has been selected, note that the Manufacturer, Hand Control Model #, Device 

Model # and Info fields are automatically updated to show any property-level file information 

that was associated with the selected IR file when it was created.

Use the up and down arrows to adjust the IR pulse time (in .10-second increments) in the IR 

Pulse field. The default setting is .5 seconds.

Open the IR Mapping tab of the Device Configuration dialog to assign IR function/channels to 

Touch Panel functions:

a.   Click the Auto Assign button to automatically assign IR Functions to Touch Panel 

functions. In most cases, this should be sufficient. However, you can use the IR Mapping 

tab to manually assign IR Functions to Touch Panel functions:

b.  Select the Touch Panel function that you want to associate an IR Function to (in the right-

hand table).

c.   Select the IR Function that you want to assign to the selected Touch Panel function (in the 

left-hand table), and click the right arrows button to copy the selected IR Function to the 

selected Touch Panel function.