AMX design xpress home theater v1.3 ユーザーガイド
Using the DXP-HT Project Wizard
30
DXP-HT v1.3 - Programmer’s Guide
IP Data: For IP-controlled devices, enter the IP address of the device in the IP Address
field. The IP Port number is set within the Control Method and is not accessible. This
field is only enabled if IP was selected as the Control Method.
Device Configuration dialog - IR Mapping tab
The options in the IR Mapping tab (FIG. 3) help to insure that the button you press on the touch
panel does what you expect. IR files, especially custom IR files, do not always use the same
channel numbers for the same IR functions. As a result, you must map each IR function for each IR
device in the system. If irregular functions occur in the finished system, it is a good idea to revisit
the IR mapping.
It is also important to note that changing the IR mapping will affect subsequent configuration
screens. This is especially true for the Receiver's IR mapping, since the Receiver functions play
such a integral role in system operations.
The IR Mapping tab is divided into two main areas: IR File Functions and the Program Functions.
The IR Function List is on the left side of the window. The IR file selected on the Device
Data tab is opened and all functions and their associated names and channel numbers are
listed.
Each device IP Address must be unique, with only one exception: MAX servers can
use one IP with multiple output zones per display name entry. For example, a MAX-
IMS assigned to IP Address 1.1.1.1 - Zone 1 can exist in the same project as another
MAX-IMS assigned to IP Address 1.1.1.1 - Zone 2. But you cannot assign two MAX
servers with the same IP Address and Output Zone (you will receive an error
message).
use one IP with multiple output zones per display name entry. For example, a MAX-
IMS assigned to IP Address 1.1.1.1 - Zone 1 can exist in the same project as another
MAX-IMS assigned to IP Address 1.1.1.1 - Zone 2. But you cannot assign two MAX
servers with the same IP Address and Output Zone (you will receive an error
message).
FIG. 3 Device Configuration dialog - IR Mapping tab