AMX design xpress home theater v1.3 ユーザーガイド

Anytime that you assign text to any type of preset button in your project, you must transfer the 

button text that appears on the buttons in DXP-HT to the NetLinx Master, in order to display the 

button text on the panel(s) in the system. This is true for CD Titles, Tuner Presets, Favorites 

buttons, etc. Use File Transfer Protocol (FTP) to transfer the files.

To use FTP to transfer these files to the system's NetLinx Master, you'll need to know the master's 

IP Address:

Launch Windows Explorer, and navigate to the directory where your DXP-HT project is 

located.

Locate and select every TXT file in the project folder. Be sure to select every TXT file, and 

only TXT files.

Copy the files to clipboard memory (right-click on the selection and select Copy).

Launch Internet Explorer.

In the Address box, enter FTP://, followed by the IP Address of the Master, and press Enter.

Assuming the IP Address was entered correctly, and the Master is connected properly, you are 

presented with a dialog prompting you to enter the User Name and Password for the Master.

 

The default User Name is NetLinx

 

The default Password is password.

Enter the User Name and Password, and click the Log On button. Once you are logged on to 

the Master, you should see directories associated with your DXP-HT project.

Paste the copied TXT files into the root of this directory. Do not paste them into a folder or 

create a new folder for them; they must reside at the root.

Reboot the Master.

• General Information

This section of the report details the user interface file names for each 
touch panel, which files need to be transferred to the master, lighting 
scene addresses, file names of the generated NetLinx software, etc.

• AMX Recommended 

Equipment List

This section of the report lists all of the AMX equipment that will be 
needed to build, install, and run the system. Both model numbers and 
descriptions are given to make ordering the equipment a simple pro-
cess.