ASUS TS500-E5 ユーザーズマニュアル

Chapter 2:  Hardware setup

2-12

Make sure to unplug the power supply before adding or removing DIMMs or 

other system components. Failure to do so may cause severe damage to both 

the motherboard and the components.

To install a DIMM:
1.  Unlock a DIMM socket by pressing 

the retaining clips outward.

2.  Align a DIMM on the socket 

such that the notch on the DIMM 

matches the break on the socket.

3.  Firmly insert the DIMM into the 

socket until the retaining clips 

snap back in place and the DIMM 

is properly seated.

•  A DDR2 DIMM is keyed with a notch so that it fits in only one direction. Do 

not force a DIMM into a socket to avoid damaging the DIMM.

•  The DDR2 DIMM sockets do not support DDR DIMMs. Do not install DDR 

DIMMs to the DDR2 DIMM sockets.

To remove a DIMM:
1.  Simultaneously press the retaining 

clips outward to unlock the DIMM.

2.  Remove the DIMM from the socket.

Support the DIMM lightly with 

your fingers when pressing the 

retaining clips. The DIMM might 

get damaged when it flips out with 

extra force.