HP color laserjet 3000n ユーザーズマニュアル

ENWW

Because media might be jammed in more than one location inside the 
printer, check the LCD control panel for information about the jam 
location. Then follow the procedures that correspond with the displayed 
message. To clear an all pages jam, complete all four procedures in the 
order that they appear in this section.

Press 

 (down arrow button) on the LCD control panel for more 

information about the jam.

If the media tears when you try to remove it, make sure that all 
media fragments are removed from the printer before 
resuming printing.

After the jam is cleared, the printer will attempt to reprint jammed pages 
when sufficient memory is available. For more information about this 
feature or to change the jam recovery setting, see “

.”

Pull out the tray indicated on the LCD control panel (where X = 2 
or 3), and place it on a flat surface. If clearing a jam in optional 
Tray 3, grasp the handle below Tray 3 and pull it out until you feel 
some resistance. Use your other hand to grasp the side of the tray 
and lift up slightly. Remove Tray 3 from the printer and place it on a 
sturdy, level surface that completely supports the tray.

Optional Tray 3 is heavy. If clearing a jam in Tray 3, use two hands 
when removing and inserting the tray.

Remove any wrinkled or curled media from the tray. Make sure the 
media width and length guides fit snugly but gently against the 
edges of the media stack.

The printer contains metal parts that might be hot. Avoid touching 
the metal parts inside the printer.