HP compaq t5000 ユーザーズマニュアル

Depending on the ports available, the thin client can provide services 
for USB, serial, parallel, and PCI devices, as long as the appropriate 
software is installed. Factory-installed software is described in the 
following section. As they become available, you can install add-ons 
for other services using the Altiris Deployment Solution software. For 
more information, see 

.

Use this procedure to determine the port assigned to a device 
connecting to the thin client through a USB to serial converter cable.

1. Connect a printer or other device to the serial port of the converter 

cable. Do not connect the USB end of the converter cable to the 
thin client at this time.

2. Open the Device Manager window (Control Panel > System > 

Hardware Tab > Device Manager).

3. A Ports (COM & LPT) listing may or may not display, depending 

on thin client model and whether a device driver was previously 
installed to a port. If the listing does display, expand it to display 
ports currently used.

4. Plug in the USB end of the converter cable to the thin client.

5. The Ports (COM & LPT) listing will display if not already shown. 

Under the Ports (COM & LPT) listing, a new COM port will 
display for the new connection. Note which COM port number is 
assigned to the new connection.

6. Continue the installation procedure for the connected device 

using the discovered port number when prompted. Use the 
manufacturer’s procedures for other devices, such as a serial 
touch screen.

✎

You cannot use more than two USB to serial converters at one time.