HP compaq t5000 ユーザーズマニュアル

A universal print driver is installed on the thin client to support 
text-only printing to a locally connected printer. To print full text and 
graphics to a locally connected printer, install the driver provided by 
the manufacturer and follow the manufacturer’s instructions. Be sure 
to disable the write filter cache or run the 

 command to save 

the installation. You can print to network printers from ICA and RDP 
applications through print drivers on the servers.

For more information, review the following document: 

Ä

CAUTION: If the available free space on the flash memory is reduced to 

less than 3 MB, the thin client becomes unstable.

✎

Downloading and using printers requires sufficient flash space. In 
some cases, you may have to remove software components to free up 
space for printers.

✎

Printing to a locally-connected printer from an ICA or RDP session 
using the print drivers of the server produces full text and graphics 
functionality from the printer. To do this, you must install the print 
driver on the server and the text-only driver on the thin client (see the 
following section).

Follow these steps to add a printer using the text-only print driver:

1. Connect the printer to the parallel port.

2. Choose Printers and Faxes from the Start > Settings menu.

3. Select Add a Printer to open the Add Printer Wizard.

4. Click Next in the first panel of the wizard.

5. Select Local printer configured to this computer.

6. Verify that the Automatically Detect and Install my Plug and 

Play Printer check box is not selected.