HP pavilion lc3700n ユーザーズマニュアル

Connect an i.LINK device to the TV. For 
information on connecting an i.LINK device, see 
“Connecting an i.LINK device” on page 19.

Press the i.LINK button on the remote control to 
open the i.LINK control panel.

Use the arrow buttons on the remote control to 
highlight a function and press Select.

Use the Record, Stop, Rewind, Fast-Forward, Pause, 
and Play buttons to operate the i.LINK device.

Press the i.LINK button to hide the i.LINK control 
panel.

i.LINK is an interface connection using a serial transfer 
system that transfers multimedia data, such as digital 
images and digital sound, between devices that have 
i.LINK terminals. 

i.LINK is a term defined in the IEEE 1394 (Institute of 
Electrical and Electronics Engineer) standard. 
Currently, the transfer speeds are at 100 Mbps, 200 
Mbps, and 400 Mbps, each of them expressed as 
S100, S200, and S400 respectively. The maximum 
speed for this TV is 400 Mbps. 

Only D-VHS decks, AV HDD recorders, and Blu-ray 
Disc recorders can be connected to this TV with i.LINK.  
Device recognition, control, recording, and playback 
operations may not be possible on some devices. 
Other devices such as DVD recorders, digital video 
cameras, PCs, or PC peripheral devices do not meet 
the specifications for this TV and cannot be connected 
with i.LINK.

Only digital programs can be recorded by i.LINK 
devices connected to this TV using i.LINK. i.LINK 
recording is not compatible with analog broadcasts or 
external input signals (Inputs 1 through 5).

The function for automatically adjusting the recording 
mode of connected i.LINK devices can be turned on or 
off. Most of the currently available i.LINK devices 
automatically recognize the transfer rates of the 
pictures and sound being recorded. These devices 
control the recording mode accordingly. Set this Mode 
to Pass through in normal circumstances. 

Depending on the i.LINK devices used and the type of 
broadcast being recorded, this TV may not adjust the 
recording mode properly. In this case, set the 
recording mode to Pass through.

Press the Menu button on the remote and the menu 
screen displays.

Press the up arrow and down arrow buttons on the 
remote control to highlight Digital Setup, and 
press Select.

Press the up arrow and down arrow buttons on the 
remote control to highlight i.LINK Setup, and 
then press Select.

Press the up arrow and down arrow buttons on the 
remote control to highlight Recording Mode,
and then press Select.

Press the left arrow and right arrow buttons on the 
remote control to select Auto or Pass through,
and then press Select.

Normally, this should be set to Pass through.

Press the Menu button to view the display. 

Power consumption during standby mode can be 
minimized by changing the setting of the Standby 
Mode in i.LINK Setup. When i.LINK is not in use, select 
Inactive in Standby Mode.

Press the Menu button on the remote control, and 
the menu screen displays.

Press the up arrow and down arrow buttons on the 
remote control to highlight Digital Setup, and 
press Select.