HP proliant ml370 ユーザーズマニュアル
Removal and replacement procedures 55
5.
Remove the PPM.
NOTE: The appearance of compatible PPMs may vary.
To replace the component, reverse the removal procedure.
CAUTION: Only install a PPM if the processor is installed. Both the PPM and the processor must be
installed together, otherwise the system does not boot.
IMPORTANT: PPMs do not seat if turned the wrong way.
Power supply backplane
To remove the component:
1.
Power down the server (on page
2.
Do one of the following:
•
Unlock and remove the bezel ("
•
Extend the server from the rack (on page
3.
Remove all hot-plug power supplies ("
4.
Remove the access panel ("
5.
Remove all expansion boards ("
" on page
6.
Remove the processor air baffle ("
" on page
7.
Remove the center wall ("
" on page