HP proliant ml370 Manual De Usuario

Removal and replacement procedures  55 

Remove the PPM. 

 

  NOTE:  The appearance of compatible PPMs may vary. 

To replace the component, reverse the removal procedure. 

  CAUTION:  Only install a PPM if the processor is installed. Both the PPM and the processor must be 

installed together, otherwise the system does not boot. 

  IMPORTANT:  PPMs do not seat if turned the wrong way. 

 

Power supply backplane 

To remove the component: 

Power down the server (on page 

Do one of the following: 

•

Unlock and remove the bezel ("

•

Extend the server from the rack (on page 

Remove all hot-plug power supplies ("

Remove the access panel ("

Remove all expansion boards ("

" on page 

Remove the processor air baffle ("

" on page 

). 

Remove the center wall ("

" on page