HP proliant ml370 ユーザーズマニュアル
Component identification 81
Item Description
24
Internal USB connector
25
Serial 2 connector
26 Parallel
connector
27
Diskette drive connector
System maintenance switch
Position Default
Function
S1
Off
Off = iLO 2 security is enabled.
On = iLO 2 security is disabled.
S2
Off
Off = System configuration can be modified.
On = System configuration is locked and cannot be modified.
S3 Off
Reserved
S4 Off
Reserved
S5
Off
Off = Power-on password is enabled.
On = Power-on password is disabled.
S6
Off
Off = Normal
On = ROM treats system configuration as invalid.
S7 Off
Reserved
S8 Off
Reserved
When the system maintenance switch position 6 is set to the On position, the system is prepared to erase
all system configuration settings from both CMOS and NVRAM.
all system configuration settings from both CMOS and NVRAM.
CAUTION: Clearing CMOS and/or NVRAM deletes configuration information. Be sure to properly
configure the server or data loss could occur.
Internal system health LED combinations
When the internal system health LED on the front panel ("
illuminates either amber or red, the server is experiencing a health event. Combinations of illuminated HP
Systems Insight Display LEDs and the internal health LED indicate system status.
Systems Insight Display LEDs and the internal health LED indicate system status.
NOTE: The system management driver must be installed for the internal system health LED to provide pre-
failure and warranty conditions.
The front panel health LEDs indicate only the current hardware status. In some situations, HP SIM may
report server status differently than the health LEDs because the software tracks more system attributes.
report server status differently than the health LEDs because the software tracks more system attributes.
HP Systems Insight
Display LED color
Display LED color
Internal system
health LED color
health LED color
Status
Processor failure,
socket X (amber)
socket X (amber)
Red
One or more of the following conditions may exist:
•
Processor in socket X has failed.
•
Processor X is not installed in the socket.
•
ROM detected a failed processor during POST.
Amber
Processor in socket X is in a pre-failure condition.