HP proliant ml370 Manual De Usuario

Component identification  81 

24 

Internal USB connector 

25 

Serial 2 connector 

26 Parallel 

connector 

27 

Diskette drive connector 

 

 

System maintenance switch 

   

S1 

Off 

Off = iLO 2 security is enabled. 

On = iLO 2 security is disabled. 

S2 

Off 

Off = System configuration can be modified. 

On = System configuration is locked and cannot be modified. 

S3 Off 

Reserved 

S4 Off 

Reserved 

S5 

Off 

Off = Power-on password is enabled. 

On = Power-on password is disabled. 

S6 

Off 

Off = Normal 

On = ROM treats system configuration as invalid. 

S7 Off 

Reserved 

S8 Off 

Reserved 

 

When the system maintenance switch position 6 is set to the On position, the system is prepared to erase 
all system configuration settings from both CMOS and NVRAM.  

  CAUTION:  Clearing CMOS and/or NVRAM deletes configuration information. Be sure to properly 

configure the server or data loss could occur. 

 

Internal system health LED combinations 

When the internal system health LED on the front panel ("

illuminates either amber or red, the server is experiencing a health event. Combinations of illuminated HP 
Systems Insight Display LEDs and the internal health LED indicate system status. 

  NOTE:  The system management driver must be installed for the internal system health LED to provide pre-

failure and warranty conditions. 

The front panel health LEDs indicate only the current hardware status. In some situations, HP SIM may 
report server status differently than the health LEDs because the software tracks more system attributes. 

 

Processor failure, 
socket X (amber) 

Red 

One or more of the following conditions may exist: 

•

 

Processor in socket X has failed. 

•

 

Processor X is not installed in the socket. 

•

 

ROM detected a failed processor during POST. 

  

Amber 

Processor in socket X is in a pre-failure condition.