HP proliant dl380 g7 633407-001 ユーザーズマニュアル
Removal and replacement procedures 68
8.
Close and lock the heatsink retaining latches.
9.
Install the air baffle ("
" on page
10.
If the PCI riser cage was removed, install the PCI riser cage ("
" on page
11.
Install the access panel ("
" on page
12.
Install the server into the rack.
13.
Power up the server.
DIMMs
IMPORTANT:
This server does not support mixing RDIMMs and UDIMMs. Attempting to mix
these two types causes the server to halt during BIOS initialization.
To identify the DIMMs installed in the server, see "DIMM slot locations ("
" on page
)."
To remove the component:
1.
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Extend ("
" on page
" on
) the server from the rack.
4.
Remove the access panel ("
" on page
5.
Remove the air baffle ("
" on page