Canon imageclass mf6560 ユーザーズマニュアル
1
2
3
4
5
6
7
8
Back
2-2
Advanced Copy Features
■
Collate Copy
You can copy documents collated into sets arranged in page
order. This feature can be used together with both “Two-Sided
Copying” (see p. 2-3) and “2 on 1 Combination” (see p. 2-5).
order. This feature can be used together with both “Two-Sided
Copying” (see p. 2-3) and “2 on 1 Combination” (see p. 2-5).
1.
Set documents.
Place the first page on the platen glass if you are not using the
ADF.
ADF.
2.
Press [COPY].
NOTE
If <AUTO COLLATE> is set to <COLLATE> in <STANDRD
SETTINGS> in <COPY SETTINGS>, skip steps
SETTINGS> in <COPY SETTINGS>, skip steps
and
3.
Press [Collate].
<COLLATE> appears in the LCD.
4.
Use [
] or [
] to select <ON>, then press
[OK].
5.
Use the numeric keys to enter the desired
copy quantity (1 to 99).
copy quantity (1 to 99).
6.
Press [Start].
When the documents are loaded in the ADF, collate copying
starts and no further operation is required.
starts and no further operation is required.
7.
Place the next page of the document on the
platen glass, then press [Start].
platen glass, then press [Start].
Repeat this step to scan all pages. The machine prints only one
copy of each page.
copy of each page.
8.
Press [OK].
– The machine prints the remaining sets of copies.
– To cancel all settings, press [Reset].
– To cancel all settings, press [Reset].
NOTE
When scanning multiple page documents, <MEMORY FULL>
may appear in the LCD and scanning may be canceled. If this
happens, press [Stop] to return to standby mode.
may appear in the LCD and scanning may be canceled. If this
happens, press [Stop] to return to standby mode.