Canon imageclass mf4150 ユーザーガイド
1
2
3
4
5
6
Back
5-16
Copying Problems
Cannot make copies.
Q
Have you removed the sealing tape from the
toner cartridge?
toner cartridge?
A
Make sure you remove the sealing tape from the
cartridge. (See “Install Toner Cartridge,” in the
Starter Guide.)
cartridge. (See “Install Toner Cartridge,” in the
Starter Guide.)
Q
Is the toner cartridge installed properly?
A
Make sure the toner cartridge is installed properly.
(See “Install Toner Cartridge,” in the Starter Guide.)
(See “Install Toner Cartridge,” in the Starter Guide.)
A
Make sure the scanning platform and rear cover
are fully closed.
are fully closed.
Q
Is the document loaded correctly?
A
Make sure the document is correctly loaded. (See
Chapter 2, “Document Handling,” in the Basic
Guide.)
Chapter 2, “Document Handling,” in the Basic
Guide.)
Q
Does the document meet the requirements for
the machine?
the machine?
A
Make sure you load documents that meet the
requirements for use. (See Chapter 2, “Document
Handling,” in the Basic Guide.)
requirements for use. (See Chapter 2, “Document
Handling,” in the Basic Guide.)
The alarm sounds or <MEMORY FULL> appears in the LCD
when making copies.
when making copies.
Q
Has an error occurred during transmission or
reception?
reception?
A
Change to the fax mode and check the LCD for an
error message and solve the problem. (See
Chapter 11, “Troubleshooting,” in the Basic Guide.)
error message and solve the problem. (See
Chapter 11, “Troubleshooting,” in the Basic Guide.)
Q
Is the machine’s memory full?
A
Check remaining memory. (See “Checking
Remaining Memory,” on p. 3-3.)
Remaining Memory,” on p. 3-3.)