Canon imageclass mf4150 ユーザーガイド
1
2
3
4
5
6
Back
5-14
Received faxes print blotched or unevenly.
Q
Are the telephone lines in poor condition, or do
you have a bad connection?
you have a bad connection?
A
Error Correction Mode (ECM) should eliminate
such problems. However, if the telephone lines are
in poor condition, you may have to try again.
such problems. However, if the telephone lines are
in poor condition, you may have to try again.
Q
Is the sender’s machine functioning properly?
A
Ask the sender to check that the scanning
components of the machine are clean.
components of the machine are clean.
Q
Is the toner low or unevenly distributed?
A
Redistribute the toner inside the toner cartridge. If
the problem persists, replace the toner cartridge.
(See Chapter 10, “Maintenance,” in the Basic
Guide.)
the problem persists, replace the toner cartridge.
(See Chapter 10, “Maintenance,” in the Basic
Guide.)
Receiving of documents is too slow.
Q
Is the resolution set to <FINE> or <SUPER
FINE>?
FINE>?
A
Setting the resolution to <STANDARD> reduces
the receiving time. However, any fine text in the
document will also be harder to read.
the receiving time. However, any fine text in the
document will also be harder to read.
You cannot get documents from information services.
Q
Is your machine connected to a rotary pulse
telephone line?
telephone line?
A
According to the instructions of information
services, press [Tone] to carrying out the tone
pulse temporarily.
services, press [Tone] to carrying out the tone
pulse temporarily.
Q
Were there any instructions from the sender,
such as to set to receive?
such as to set to receive?
A
Just before receiving, press [Start].