Canon multipass c3500 ユーザーズマニュアル

Chapter 10

Paper is loaded skewed

Paper may not be stacked 

Make sure the stack of paper

(printing is skewed)

correctly in the sheet feeder.

is straight in the sheet feeder.

Make sure the right side of the
stack of paper is aligned against
the right side of the sheet
feeder and the paper guide is
aligned against the left side.

Make sure the paper exit path
is clear.

Multiple sheets load 

Paper may not be stacked

Make sure paper is installed

into unit at the same

correctly.

correctly in the sheet feeder.

time

Sheets of paper may be 

Be sure to fan the stack of

sticking together.

paper before placing it in the
sheet feeder.

Too much paper may be 

Make sure the paper rest is

stacked in the sheet feeder.

extended and the paper is
stacked correctly in the sheet
feeder.

Make sure the stack of paper
does not exceed the limit mark.
If necessary, remove a few
sheets from the sheet feeder.

Do not stack more than 
approximately 100 sheets of
plain paper in the sheet feeder.

Do not force the stack into the
sheet feeder.

Different types of paper may

Load just one type of paper.

be stacked in the sheet feeder.

Make sure you are loading
paper that matches the
specifications of this unit.
See Appendix A, Specifications,
for details.

Transparencies or back

The film may not be loaded

Make sure you load no more

print film do not feed 

correctly.

than 50 sheets of transparencies

correctly

or 10 sheets of back print film
in the sheet feeder.