Sony 3-299-270-21(2) ユーザーズマニュアル
27
GB
Getting
Star
ted
Confirming/saving the
measurement result
measurement result
1
Confirm the measurement result.
When the measurement ends, a beep sounds
and the measurement result appears on the
top panel display.
and the measurement result appears on the
top panel display.
• After “SAVE EXIT” is displayed for 50 seconds, the
measurement result is saved automatically, without
the need to saving procedure.
the need to saving procedure.
2
Press
x/X repeatedly to select the
desired item, then press
or
c. To
return, press
C or RETURN.
3
Save the measurement result.
Select “SAVE EXIT” in step 2, then press
.
The measurement result is saved.
When error codes appear
Try the remedies and perform the Auto
Calibration again.
Calibration again.
When you select “WRN CHECK”
If a warning on the measurement result is
present, detailed information is displayed.
present, detailed information is displayed.
Item
Explanation
SAVE EXIT
Saves the measurement result
and exits the setting process.
and exits the setting process.
WRN CHECK
DIST INFO
Displays the measurement
result for speaker distance.
result for speaker distance.
LEVEL INFO
Displays the measurement
result for speaker level.
result for speaker level.
EXIT
Exits the setting process
without saving the
measurement result.
without saving the
measurement result.
Note
Item
Explanation
ERROR 32
• The sound input from the
calibration mic is out of the
acceptable range.
acceptable range.
• The calibration mic or
subwoofer may be damaged.
Contact your Sony dealer or
local authorized Sony service
facility.
local authorized Sony service
facility.
ERROR F 33
The front speakers are not
connected.
connected.
Check that the front speakers
are connected properly.
are connected properly.
ERROR SR 33
Either the surround left or
surround right speaker is not
connected.
surround right speaker is not
connected.
Check that the surround
speakers are connected
properly.
speakers are connected
properly.
ERROR SW 33
The subwoofer may be
damaged.
damaged.
Contact your Sony dealer or
local authorized Sony service
facility.
local authorized Sony service
facility.
Warning code
Explanation
WARNING 40
The Auto Calibration has
completed. However, the noise
level is high. You may be able
to perform the Auto Calibration
properly if you try it again, even
though the measurement cannot
be performed in all
environments. Try to perform
the Auto Calibration in a quiet
environment.
completed. However, the noise
level is high. You may be able
to perform the Auto Calibration
properly if you try it again, even
though the measurement cannot
be performed in all
environments. Try to perform
the Auto Calibration in a quiet
environment.
WARNING 41
WARNING 42
The sound input from the
calibration mic is out of the
acceptable range. The distance
between the calibration mic and
the speakers is too closed. Set
them away, and then try to
perform the Auto Calibration.
calibration mic is out of the
acceptable range. The distance
between the calibration mic and
the speakers is too closed. Set
them away, and then try to
perform the Auto Calibration.
WARNING 43
The distance and position of the
subwoofer cannot be detected.
This may be caused by noise.
Try to perform the Auto
Calibration in a quiet
environment.
subwoofer cannot be detected.
This may be caused by noise.
Try to perform the Auto
Calibration in a quiet
environment.
NO WARNING
There is no warning
information.
information.
Item
Explanation
continued