Sony ht ddw1600 ユーザーズマニュアル
34
GB
Error codes
When an error is detected during Auto
Calibration, an error code will appear on the
display cyclically after each measurement
process as follows:
Error code
Calibration, an error code will appear on the
display cyclically after each measurement
process as follows:
Error code
t blank display t (error code t
blank display)
a)
t PUSH t blank display
t ENTER
a)
Appears when there are more than one error code.
To rectify the error
1
Record down the error code.
2
Press
on the remote.
3
Press ?/1 to turn off the receiver.
4
Rectify the error.
For details, see “Error code and remedies”
below.
For details, see “Error code and remedies”
below.
5
Turn on the receiver and perform Auto
Calibration again (page 33).
Calibration again (page 33).
Error code and remedies
Warning codes
During Auto Calibration, the warning code
provides information on the measurement
result. The warning code will appear on the
display cyclically as follows:
provides information on the measurement
result. The warning code will appear on the
display cyclically as follows:
Warning code
t blank display t (warning
code
t blank display)
b)
t PUSH t blank
display
t ENTER
b)
Appears when there are more than one warning
code.
code.
You can choose to ignore the warning code as
the Auto Calibration function will
automatically adjust the settings. You can also
change the settings manually.
the Auto Calibration function will
automatically adjust the settings. You can also
change the settings manually.
To change the settings
manually
manually
1
Record down the warning code.
2
Press
on the remote.
3
Press ?/1 to turn off the receiver.
4
Follow the solution provided in the
“Warning code and solution” below.
“Warning code and solution” below.
5
Turn on the receiver and perform Auto
Calibration again (page 33).
Calibration again (page 33).
Error and warning codes
Error
code
Explanation
Remedies
ERROR 10 The environment
is too noisy.
Make sure the
environment is
quiet during Auto
Calibration.
environment is
quiet during Auto
Calibration.
ERROR 11 The speakers are
placed too near
the optimizer
microphone.
the optimizer
microphone.
Place your speakers
further away from
the optimizer
microphone.
further away from
the optimizer
microphone.
ERROR 12 None of the
speakers are
detected.
detected.
Make sure that the
optimizer
microphone is
connected properly
and perform Auto
Calibration again.
optimizer
microphone is
connected properly
and perform Auto
Calibration again.
ERROR 20 The front
speakers are not
detected or only
one front speaker
is detected.
detected or only
one front speaker
is detected.
Check the front
speakers
connection.
speakers
connection.
ERROR 21 Only one
surround speaker
is detected.
is detected.
Check the surround
speakers
connection.
speakers
connection.
ERROR 23 Surround back
speaker is
detected but
surround
speakers are not
connected.
detected but
surround
speakers are not
connected.
Be sure to connect
the surround
speakers.
the surround
speakers.
Error
code
Explanation
Remedies