Sony NT-2 ユーザーズマニュアル

43

TSee the illustrations in the Japanese
text (page 22).

The recording time and date stamped
on the tape is displayed during
playback.  Each time you press MODE,
the display changes as follows:

Tape counter (Counted length of the
tape, not elapsed time)

v

Remaining time

v

Year, month, and date recorded

v

Hour, minute, and second recorded

Press COUNTER RESET.  The tape
counter indicates "0H00M00S".

Slide back HOLD in the opposite
direction of the arrow.

See the illustrations in the Japanese
text (page 23).

Before starting operation, you can
check which side of the tape in the
recorder is to be played or recorded.

While the recorder is not operating,
keep pressing 

p for a while.

" A Side" or "B Side" appears in the
display.

$

z

See the illustrations in the Japanese
text (page 23).

To prevent the buttons from being
accidentally operated, use the Hold
function.
It can lock the controls while you are
walking with the recorder in your bag
or pocket.  Even when this function is
activated, you can still reset the tape
counter and change the display.

Slide HOLD in the direction of the
arrow.
The HOLD switch on the recorder
works to lock the controls on the
recorder.
The HOLD switch on the remote
control works to lock the controls on
the remote controller.

z

If you experience any of the following
difficulties while using your recorder,
use this troubleshooting guide to help
you remedy the problem.

• The cassette holder cannot be

closed.

nThe cassette tape is not inserted

properly.

• The recorder does not work though

a certain button is pressed.

• No indication appears in the

display.

• The tape does not move.

nThe battery is weak.

Replace the battery with a new
one.

nConnect the power source

correctly.

nSlide back HOLD.