Sony SNCCX600 ユーザーズマニュアル
Ad
minis
minis
tra
ting t
he Camer
a
Configuring the Network — Network Menu
29
Configuring the Network
— Network Menu
When you click
in the Administrator menu, the
Network menu appears.
Use this menu to configure the network to connect the
camera and the computer.
The Network menu consists of the following tabs:
SNC-CX600W: Network, Wi-Fi and QoS
SNC-CX600: Network and QoS
Use this menu to configure the network to connect the
camera and the computer.
The Network menu consists of the following tabs:
SNC-CX600W: Network, Wi-Fi and QoS
SNC-CX600: Network and QoS
Network Tab
This section provides the menus for connecting the
camera through the network cable.
camera through the network cable.
Status
MAC address
Displays the MAC address of the camera.
Displays the MAC address of the camera.
Ethernet status
Displays the current transmission rate.
Displays the current transmission rate.
Auto-MDI/MDIX
According to the port of the connected Ethernet
device, automatically switches the port of the unit
between MDI and MDI-X for transmission.
Displays the Ethernet port mode of the unit.
According to the port of the connected Ethernet
device, automatically switches the port of the unit
between MDI and MDI-X for transmission.
Displays the Ethernet port mode of the unit.
IP address
Displays the current IP address.
Displays the current IP address.
Subnet mask
Displays the current subnet mask.
Displays the current subnet mask.
Default gateway
Displays the current default gateway.
Displays the current default gateway.
LinkLocal IP address
Displays the current link-local IP address.
Displays the current link-local IP address.
Primary DNS server
Displays the current primary DNS server.
Displays the current primary DNS server.
Secondary DNS server
Displays the current secondary DNS server.
Displays the current secondary DNS server.
IPv6 address 1, 2
Displays the current IPv6 address.
Displays the current IPv6 address.
IPv6 default gateway
Displays the current IPv6 default gateway.
Displays the current IPv6 default gateway.
LinkLocal IPv6 address
Displays the current link-local IPv6 address.
Displays the current link-local IPv6 address.
IPv4 setting
Configure the IPv4 network setting.
To obtain the IP address automatically from
a DHCP server
Select Obtain an IP address automatically
(DHCP).
The IP address, subnet mask, default gateway are
assigned automatically.
a DHCP server
Select Obtain an IP address automatically
(DHCP).
The IP address, subnet mask, default gateway are
assigned automatically.
Note
When you select Obtain an IP address
automatically (DHCP), make sure that a DHCP
server is operating on the network.
automatically (DHCP), make sure that a DHCP
server is operating on the network.
To specify the IP address manually
Deselect Obtain an IP address automatically
(DHCP). Type the address in the IP address,
Subnet mask and Default gateway boxes. Host
name and Domain suffix are not available.
Deselect Obtain an IP address automatically
(DHCP). Type the address in the IP address,
Subnet mask and Default gateway boxes. Host
name and Domain suffix are not available.
IP address
Type the IP address of the camera.
Type the IP address of the camera.
Subnet mask
Type the subnet mask.
Type the subnet mask.
Default gateway
Type the default gateway.
Type the default gateway.
Host name
Type the host name of the camera to be transmitted
to the DHCP server. This setting is valid only when
Obtain an IP address automatically (DHCP) is
selected.
Type the host name of the camera to be transmitted
to the DHCP server. This setting is valid only when
Obtain an IP address automatically (DHCP) is
selected.
Domain suffix
Type the domain suffix of the camera to be
transmitted to the DHCP server. This setting is valid
only when Obtain an IP address automatically
(DHCP) is selected.
Type the domain suffix of the camera to be
transmitted to the DHCP server. This setting is valid
only when Obtain an IP address automatically
(DHCP) is selected.
Note
The domain suffix is sent to the DHCP server as
FQDN (Fully Qualified Domain Name)
information when Host name is set.
FQDN (Fully Qualified Domain Name)
information when Host name is set.
IPv6 setting
Configure the IPv6 network setting.
Network