Sony SNCCX600 ユーザーズマニュアル

Ad
minis

tra

ting t

he Camer

a

Configuring the Network — Network Menu

30

To obtain the IPv6 address automatically
Select Obtain IP address automatically.
The IP address, prefix length, default gateway are 
assigned automatically.

If you select Obtain IP address automatically, ask 
the network administrator whether an IPv6 address 
can be assigned.
This function is not available in a multi-prefix 
environment. The transmission may not work 
properly.

To specify the IPv6 address manually
Deselect Obtain IP address automatically. Type 
the address in the IP address, Prefix length and 
Default gateway boxes.

IP address
Type the IP address of the camera.

Prefix length
Type the prefix length value.

Default gateway
Type the default gateway.

Configure the common setting for IPv4 and IPv6 
network.

HTTP port number
Type the HTTP port number. Normally select 80.

MTU
Type the IP-MTU value for the Ethernet port.

To obtain DNS server address 
automatically
Select Obtain DNS server address automatically. 
The Primary DNS server and Secondary DNS 
server are assigned automatically.

To obtain a DNS server address automatically, first 
enable Obtain an IP address automatically 
(DHCP) in the IPv4 setting, or Obtain IP address 
automatically in the IPv6 setting.
Ask the network administrator whether a DNS 
server address can be obtained automatically.

To specify the DNS server address 
manually
Deselect Obtain DNS server address 
automatically. Type the address in the Primary 
DNS server and Secondary DNS server boxes.

Primary DNS server
Type the IP address of the primary DNS server.

Secondary DNS server
Type the IP address of the secondary DNS server, if 
necessary.

Supported models: SNC-CX600W
Use this tab to set the connection of the Wi-Fi network.

• A wired network and a Wi-Fi network cannot be used 

at the same time.

• The IP address of a Wi-Fi network will be assigned 

only when a wired network is not connected.

Displays the current connection status of a Wi-Fi 
network.
If the camera is connected to a Wi-Fi router, the display 
will be highlighted.

Displays SSID of the Wi-Fi router that can be connected 
to.

Displays the current setting method as either 
authentication or encryption.

None
Connect to a Wi-Fi router without encryption.

WEP
Connect to a Wi-Fi router using WEP (Wired Equivalent 
Privacy).

WPA/WPA2
Connect to a Wi-Fi router by performing an 
authentication which is compliant to WPA/WPA2 
(Wi-Fi Protected Access).

Displays the wireless channels of a Wi-Fi router that can 
be connected to.