Sony SNCCX600 ユーザーズマニュアル

Ad
minis

tra

ting t

he Camer

a

Setting the Security — Security Menu

34

When you click 

 in the Administrator menu, the 

Security menu appears.
The Security menu consists of the User, Access limit, 
SSL, 802.1X tabs.

Set the user names and passwords of Administrator and 
up to 9 types of user (User 1 to User 9), and the viewer 
mode of each user.

Specify User name, Password, Re-type password and 
Viewer mode for each user ID.

User name
Type a user name between 5 and 16 characters.

Password
Type a password between 5 and 16 characters.

Re-type password
To confirm the password, retype the password that you 
typed in the Password box.

Audio
Set whether to enable the audio output from the speaker 
of the camera, by using SNC audio upload tool. Select 
the checkbox to enable.

When you want to set the audio output using the SNC 
audio upload tool, be sure to set Audio upload in the 
Audio tab of the Video / Audio menu to Enable.

Playback
Set whether to enable using the playback viewer. Select 
the checkbox to enable.

Viewer mode
When the user is authenticated for logging in the viewer, 
select the viewer mode to be displayed after 
authentication.

Administrator: The user can operate all functions in 

this mode.

Full: The user can operate all functions except deleting 

the recorded movie in the memory card.

Pan/Tilt: In addition to the Light mode, the user can 

operate pan/tilt/zoom.

Light: In addition to the View mode, the user can select 

the image size of the live viewer, select codec and 
capture a still image.

View: The user can only monitor the camera image.

For the functions available for each viewer mode, see 
“Administrator and User” on page 9.

Set whether the user is authenticated or not when the 
viewer is displayed.

When the checkbox is selected, the viewer is displayed 
in accordance with the viewer mode of the authenticated 
user. When the checkbox is not selected, select the 
viewer mode of the viewer which is displayed without 
authentication from Full, Light or View.

This allows you to control which computers can have 
access to the camera.
Likewise, when using IPv6, security settings can be 
configured for each network.

Select the checkbox to enable the access limit.

Select the basic policy of the limit from Allow and Deny 
for the computers specified in the Network address/
Subnet 1 to Network address/Subnet 10 menus below.

Type the network addresses and subnet mask values that 
you want to allow or deny access to the camera.
You can specify up to 10 network addresses and subnet 
mask values. For a subnet mask, type 8 to 32. 
(In the case of IPv6, enter a value between 8 and 128.)
Select Allow or Deny from the drop-down list on the 
right for each network address/subnet mask.

The subnet mask value represents the bit number from 
the left of the network address.
For example, the subnet mask value for “255.255.255.0” 
is 24.
If you set 192.168.0.0/24 and Allow, you can allow 
access from computers having an IP address between 
“192.168.0.0” and “192.168.0.255”.