Sony SNCCX600 ユーザーズマニュアル

O

v

er

v

iew

Accessing the Camera Using the Web Browser

6

After the IP address has been assigned to the camera, 
check that you can actually access the camera using the 
Web browser installed on your computer. 

Start the Web browser on the computer and type the 
IP address of the camera in the URL address bar.

The live viewer window is displayed.

• The maximum of users on the network who can see a 

viewer concurrently is 5. However, if the transmission 
ability of the camera is overloaded, access to the 
camera may not be possible, even if there are fewer 
than 5 users.

• When using a Wi-Fi network, it may take longer for 

the image to be transmitted.

The model on sale in China does not support the SSL 
function.

When Internet Explorer 7, Internet Explorer 8, 
Internet Explorer 9 or Internet Explorer 10 is 
used
When you enter the camera IP address, “Certificate 
Error” may appear according to the status of the 
certificate set on the camera. In this case, click Continue 
to this website (not recommended). to continue.

The live viewer window appears (in SSL 
communication).

When “Allow HTTP connection for some 
clients” (page 35) is checked
To use HTTP and SSL connections separately to access, 
enter the following in the address box of the browser.

For HTTP connection
http://192.168.0.100/index.html?lang=en

For SSL connection
https://192.168.0.100/index.html?lang=en

“Security Warning” is displayed. When you click Yes, 
ActiveX control is installed and the live viewer is 
displayed.

• If Automatic configuration is enabled in the Local 

Area Network (LAN) settings of Internet Explorer, the 
image may not be displayed. In that case, disable 
Automatic configuration and set the proxy server 
manually. For the setting of the proxy server, consult 
your network administrator.

• When you install ActiveX Control, you should be 

logged in to the computer as Administrator.